The LumiLor® starter Kit contains the essentials you need to follow along with the LumiLor® online training videos. The kit includes:
(1) 8 inch x 10 inch panel (to be painted)
(1) 3D LumiLor Shape (to be painted)
(1) 1 foot strip of copper tape
(1) Package of J-B KwikWeld
(2) Male connectors with spade attachments
(2) 18 volt inverter attachments
(2) Small inverters
(4) 9 volt batteries
Check out the video below to know more about Lumilor Training :
Click Here!
The LumiLor® starter Kit contains the essentials you need to follow along with the LumiLor® online training videos. The kit includes:
(1) 8 inch x 10 inch panel (to be painted)
(1) 3D LumiLor Shape (to be painted)
(1) 1 foot strip of copper tape
(1) Package of J-B KwikWeld
(2) Male connectors with spade attachments
(2) 18 volt inverter attachments
(2) Small inverters
(4) 9 volt batteries
Check out the video below to know more about Lumilor Training :
Click Here!
Substrates, inverters, and accessories that when combined with a LumiLor Bundle provide the end user with a LumiLor Starter Kit which matches the online video training.
A 4oz LumiLor Starter Kit contains enough LumiLor to complete the projects included in the starter kit without having any remaining LumiLor.
An 8oz LumiLor Starter Kit will provide additional LumiLor that can be used on projects.
(1) 8 inch x 10 inch panel (to be painted)
(1) 3D LumiLor Shape (to be painted)
(1) 1 foot strip of copper tape
(2) Male connectors
(2) Male connectors with spade attachments
(2) 18V inverter attachments
(2) Small inverters
(1) Package of J-B KwikWeld
Check out the video below to know more about Lumilor Training :
Click Here!
A LumiLor® Paint Bundle contains the correct ratios of all coating components necessary to cover the approximate area listed for each size bundle. The components included are:
Backplane
Dielectric
LumiColor (blue, green, aqua, orange, pink, violet, yellow or white)
Conductive Clear
Coverage area is dependent factors such as overspray and thickness of application.
Approximate coverage area for each bundle size:
4oz: 1.5 to 2 square feet (.14 to .23 square meters)
Check out the video below to know more about Lumilor Training :
Click Here!
A LumiLor Bundle contains the correct amounts of all LumiLor components necessary to cover the approximate area listed for each size bundle.Bundles contain LumiLor paint only, electronics for your project should be purchased separately.
- Backplane
- Dielectric
- LumiColor
- Conductive Top Coat
Coverage area is dependent factors such as overspray and thickness of application.
Check out the video below to know more about Lumilor Training :
Click Here!
Check out the video below to know more about Lumilor Training :
Click Here!
4oz (118 ml) of LumiLor Dielectric – Base Version. 4 Pack.
Check out the video below to know more about Lumilor Training :
Click Here!
4oz (118 ml) of LumiColor – Base Version. 4 Pack.
Check out the video below to know more about Lumilor Training :
Click Here!
Check out the video below to know more about Lumilor Training :
Click Here!
Check out the video below to know more about Lumilor Training :
Click Here!
Check out the video below to know more about Lumilor Training :
Click Here!
12-3100 BLUE
12-3200 GREEN
12-3400 ORANGE
12-3600 PINK
12-3700 VIOLET
12-3000 WHITE
12-3500 YELLOW
12-3300 AQUA
Check out the video below to know more about Lumilor Training :
Click Here!
Check out the video below to know more about Lumilor Training :
Click Here!
Check out the video below to know more about Lumilor Training :
Click Here!
8oz (237 ml) of LumiLor Dielectric – Base Version. 4 Pack.
Check out the video below to know more about Lumilor Training :
Click Here!
8oz (237 ml) of LumiColor – Base Version. 4 Pack
SKUs
12-3111 BLUE
12-3211 GREEN
12-3411 ORANGE
12-3611 PINK
12-3711 VIOLET
12-3011 WHITE
12-3511 YELLOW
12-3311 AQUA
Check out the video below to know more about Lumilor Training :
Click Here!
8oz (237 ml) of LumiLor Conductive Top Coat – Base Version. 4 Pack.
Check out the video below to know more about Lumilor Training :
Click Here!
8oz (237 ml) of LumiLor Backplane – Base Version.
Check out the video below to know more about Lumilor Training :
Click Here!
Check out the video below to know more about Lumilor Training :
Click Here!
8oz (237 ml) of LumiColor – Base.
SKUs
12-3111 BLUE
12-3211 GREEN
12-3411 ORANGE
12-3611 PINK
12-3711 VIOLET
12-3011 WHITE
12-3511 YELLOW
12-3311 AQUA
Check out the video below to know more about Lumilor Training :
Click Here!
Check out the video below to know more about Lumilor Training :
Click Here!
Wire connector with hardware to connect one 9V battery to electrical components.
Check out the video below to know more about Lumilor Training :
Click Here!
Black 5” wire connector without pins.
Check out the video below to know more about Lumilor Training :
Click Here!
Black 5” wire connector with pins. Attaches directly to the substrate.
Check out the video below to know more about Lumilor Training :
Click Here!
wire length:15cm; wire color :White; wire AWG:22
Check out the video below to know more about Lumilor Training :
Click Here!
Its wire length:15cm; wire color :White; wire AWG:22
Check out the video below to know more about Lumilor Training :
Click Here!
3M™ 1181 Tape consists of a 1 ounce deadsoft copper foil backing and a unique electrically conductive pressure sensitive acrylic adhesive.
Check out the video below to know more about Lumilor Training :
Click Here!
Are you a manufacturer looking for custom LumiLor samples with a specific substrate, size, shape, etc.?
Click on Contact us if interested in custom samples for testing and fill OEM Contact Form and let us know what you are interested in lighting up with LumiLor.
Check out the video below to know more about Lumilor Training :
Click Here!
Flat panels are 4″ x 12″ and are ideal for testing top coats, creating letdown panels, or to practice airbrushing.
Want to see how various hydrodips look with LumiLor? Consider dipping pieces of transparent plexiglass to lay over the LumiLor.
Interested in seeing how LumiLor can light up three dimensional shapes? Consider a LumiLor Pro Sample Shape instead of a flat panel.
Includes basic electronics.
* Samples are created to demonstrate standard LumiLor color and brightness and are not intended for manufactures testing. Click on Contact us if interested in custom samples for testing and fill OEM Contact Form and let us know what you are interested in lighting up with LumiLor.
Check out the video below to know more about Lumilor Training :
Click Here!
These samples shapes are an ideal way to see the way LumiLor can illuminate a three dimensional object. These samples can be top coated to experiment with various effects over LumiLor. Shapes are approximately 8″ x 5″ x 3″
Includes basic electronics.
* Samples are created to demonstrate standard LumiLor color and brightness and are not intended for manufactures testing. Click on Contact us if interested in custom samples for testing and fill OEM Contact Form and let us know what you are interested in lighting up with LumiLor.
Check out the video below to know more about Lumilor Training :
Click Here!
LumiLor on vinyl samples are 4″ x 12″ (illuminated area is 3″ x 12″) and are ideal for exploring the possibilities of applying LumiLor on vinyl.
Did you know LumiLor on vinyl is flexible and can bend up to 180 degrees?
These samples may be LumiLor or LumiLor Pro depending on production levels.
Includes basic electronics.
* Samples are created to demonstrate standard LumiLor color and brightness and are not intended for manufactures testing. Click on Contact us if interested in custom samples for testing and fill OEM Contact Form and let us know what you are interested in lighting up with LumiLor.
Check out the video below to know more about Lumilor Training :
Click Here!
INPUT: AC 220V Constant light/ Flash; 400W
It has Constant Output,Micro controller based,Good Thermal Stability,Rugged Inverter, three modes of Operation,brightness Control. Can drive Load up to 6200 sq Inch
Check out the video below to know more about Lumilor Training :
Click Here!
INPUT: DC12V 30A Constant light/ Flash; 400W,
It has Constant Output,Microcontroller based, Good Thermal Stability, Rugged Inverter, three modes of Operation, brightness Control. It Can drive Load up to 6200 sq Inch
Check out the video below to know more about Lumilor Training :
Click Here!
INPUT: AC220V (50Hz)/110 V (60Hz) Constant light/ Flash; 50W; 400W
It has Constant Output, Micro controller based, Good Thermal Stability, Rugged Inverter, three modes of Operation,brightness Control. Can drive Load up to 850 sq Inch
Check out the video below to know more about Lumilor Training :
Click Here!
INPUT:DC12V 4,2A Constant light/ Flash; 50W
It has Constant Output,Micro controller based, Good Thermal Stability, Rugged Inverter, three modes of Operation,brightness Control. It Can drive Load up to 850 sq Inch
Check out the video below to know more about Lumilor Training :
Click Here!
It has Constant Output, Micro controller based, Good Thermal Stability, Rugged Inverter, three modes of Operation, Brightness Control. Can drive Load up to 50 sq Inch
INPUT DC12V 1A Constant light/ Flash; 6W
ISC-1200-1500 cm
Check out the video below to know more about Lumilor Training :
Click Here!
It has Constant Output,Micro controller based, Good Thermal Stability, Rugged Inverter, three modes of Operation, brightness Control. it Can drive Load up to 3100 sq Inch.
INPUT: DC12V 16.7A Constant light/ Flash; 200W
Check out the video below to know more about Lumilor Training :
Click Here!
HY-3.7V-0-600cm(600MA); 5V USB Rechargeable Battery Inverter
it has Constant Output, Micro controller based, Good Thermal Stability. Rugged Inverter, three modes of Operation.
Check out the video below to know more about Lumilor Training :
Click Here!
HY-3.7V-0-1000cm(1800MA) 5V USB
It has Rechargeable Battery Inverter. it has Constant Output, Micro controller based, Good Thermal Stability, Rugged Inverter, three modes of Operation.
Check out the video below to know more about Lumilor Training :
Click Here!
Constant Output, Micro controller based, Good Thermal Stability, Rugged Inverter, brightness Control, three modes of Operation.
DC12V Constant light/ Flash; Load 100 inch2
Check out the video below to know more about Lumilor Training :
Click Here!
Crafted with elegant design specifically for helmets, this inverter uses the latest technology for giving a balanced electrical output. Unique micro controller based board provides it with excellent thermal stability for EL designs on helmet or headgear.
Some salient features:
• Durable & Lightweight
• 3 Operational Modes (Continuous, Slow & Fast Blink)
• Fast Charging Enabled
• Full Charge Time: 45 Min.
• Standby time: 12 hrs.
• Capacity: 500 mAH
• Charging Input: 5V
• Glow Area: Upto 50 Sq. Inches
Check out the video below to know more about Lumilor Training :
Click Here!
Check out the video below to know more about Lumilor Training :
Click Here!
Nozzle Diameter is 0.2mm and cup capacity is 1.5cc. It is perfect for painting cars, surfboards, remote-controlled cars, models, etc. Also suitable for precision installation, nail art, illustrating, small objects and partial painting, hobbies, crafts, displays, moldings and “weekend carpenters.
APOLLO 112B
Check out the video below to know more about Lumilor Training :
Click Here!
Nozzle Diameter is 0.3mm and cup capacity is 7cc . It is perfect for painting cars, surfboards, remote-controlled cars, models, etc. As well as for precision installation, nail art, illustrating, small objects and partial painting, hobbies, crafts, displays, moldings and “weekend carpenters.
APOLLO 113C
Check out the video below to know more about Lumilor Training :
Click Here!
Check out the video below to know more about Lumilor Training :
Click Here!
Gravity spray gun , air inlet : 1/4″, air nozzle : 1.3mm, nylon cup : 300cc with black ring gun body: Black color plated. Air cap ring, needle screw and the spray swath adjusting knob : black and matt Black.
Check out the video below to know more about Lumilor Training :
Click Here!
Gravity spray gun , air inlet : 1/4″, air nozzle : 1.2mm, nylon cup : 300cc with black ring gun body: Black color plated. Air cap ring, needle screw and the spray swath adjusting knob : black and matt Black.
Check out the video below to know more about Lumilor Training :
Click Here!
- Less sensitive (Does not spill too much paint)
- Great lever movement for acute paint-flow control
- Pen Sense – Press Draw Operation
- 0.2 mm nozzle size
- 1.5 ml Paint Reservoir
Check out the video below to know more about Lumilor Training :
Click Here!
MP mini gravity spray gun , air inlet : 1/4″, air nozzle : 1.0mm, nylon cup : 100cc with black ring gun body: matt chrome plated. Air cap ring, needle screw and the spray swath, adjusting knob : black + matt chrome.
Check out the video below to know more about Lumilor Training :
Click Here!
CONNECTOR SPECIFICATIONS
Material for plugger and body Brass Alloy
Spring Material Stainless Steel Wire
Surface Treatment Gold Plated 1 micro inch
Current Rating 1 A
Spring Force 80g
Life Cycle 50000 max
Contact Resistance 30m Ohm
diameter 14.7 mm
Height 5.10 mm
Material Copper
Awg Standard 18
Resistivity 1.68E 18
Number Of Cores One
Resistance MTR 20
Diameter 1.024 mm
Current 7 Amp
Insulation Material Thermoset
10/Bundle
Check out the video below to know more about Lumilor Training :
Click Here!
MP mini gravity spray gun , air inlet : 1/4″, air nozzle : 1.3mm, nylon cup : 100cc with black ring gun body: matt chrome plated. Air cap ring, needle screw and the spray swath, adjusting knob : black + matt chrome
Check out the video below to know more about Lumilor Training :
Click Here!
Heat shrink connector with 2.7mm diameter , AWG 22-18 wire range, color: red, Shrink ratio: 2:1, Waterproof for wiring splices, Transparent sleeve provides visual inspection, High elasticity assures steady performance, Easy control of soldering process, Operating temperature: -55℃～125℃ Minimum shrink temperature: 140℃
50/Packet
Check out the video below to know more about Lumilor Training :
Click Here!
Check out the video below to know more about Lumilor Training :
Click Here!
- 0.3mm needle leads
- Made with professional grade Stainless Steel
- Extremely Durable
- Easy to replace and clean
Check out the video below to know more about Lumilor Training :
Click Here!
- 0.2mm Nozzle
- Durable Product
- Made from Stainless Steel
- Easy to replace and clean
Check out the video below to know more about Lumilor Training :
Click Here!
- 0.3mm Nozzle
- Precise shape for acute airbrushing
- Sturdy built
- Manufactured with high-quality metal
- Easy to remove and clean
Check out the video below to know more about Lumilor Training :
Click Here!
Double edge plastic razor blade. Perfect for removing leftover film and adhesive from surfaces that are easily damaged, such as rear window defrosters or other sensitive glass surfaces. Application: This product is used for cleaning windows coated with sun film or laminated glass. Pack of 100 blades.
Check out the video below to know more about Lumilor Training :
Click Here!
Plastic razor blade holder, ideal for holding plastic blades with utmost ease. It is portable, light weight and takes only a small place in your inventory. Holds plastic blades to their proper place so you do not lose them when they are required the most. Contains 5 pieces per bundle.
Check out the video below to know more about Lumilor Training :
Click Here!
